See other available Bunkers and Buildings concerning Warhammer 40K battlefields   

Infantry Command Bunker 3D STL files for W40K


If you have got a 3D printer with at least 18 x 18 cm building area and you aren't skilled to make cutting works, instead to loose a lot of time trying to build the model, you may purchase these files .stl ready for 3D printing and let your printer makes the hard work in place of you.
Following images show the shape of the model of bunker that your 3D printer will make for your Warhammer 40K terrain: in the top of page you see the model complete; in the bottom of page you see the four parts contained in the STL files you are purchasing.
After print, no glueing phase is required, the model will result complete because the upper part may be putted and removed in course of wargames, secondary doors will be placed distant from bunker, you only need to paint it with colors that you prefer.

For best results use good PLA filaments and set the printing data to the following values:  layer height = 0.10 mm;   outline perimeter shells = 2;
Infill density = 20%;  print speed = 20/60 mm/s;  bottom-top thickness = 0,8 mm
.  No support material is required.

  Buy Infantry Command Center STL files    

The most difficulty in order to realize a good model for 3D printing, is to draw accurate plans to convert in perfect mesh files. The project phase may require many hours/days of work.
These files are given to purchaser only in order to build one or more models suitable for own wargame terrain, author keeps all rights on commercial use of the model and files which cannot be resold or refurbished in any form without the wrote permission of the author.
These files contain perfect 3D mesh but, due to the wide variety of 3D printers and respective settings, no warranty is released about the quality of the printed models.
If you have any question, or for informations about your purchase, please write to Castiglioni A. , you will get answer in 24 hours.